Product
Ingersoll Rand 54672530 Air Filter Element | N55/N75 Screw Compressor
Genuine Ingersoll Rand 54672530 air filter element for N55/N75 screw compressors. 247 mm OD, 365 mm height, 5–10 μm filtration, synthetic/glass fiber media. Cross-reference SA17281. Export-ready with serial number matching.
- Export packaging & documentation support
- OEM / ODM customization available
- Sample and bulk order workflow
Ingersoll Rand 54672530 Air Filter Element — N55/N75 Screw Compressor Intake Filter
Product Overview
54672530 air filter element is a genuine Ingersoll Rand intake filter designed for N55 and N75 series screw air compressors. The element uses high-efficiency synthetic/glass fiber media to block dust, dirt, and particulate matter from entering the screw airend, protecting rotors, bearings, and oil seals from wear and extending compressor service life.
The 54672530 is a large cylindrical pleated element with approximately 247 mm outer diameter and 365 mm height, featuring a red polyurethane (PU) seal. It is also cross-compatible with several Atlas Copco part numbers and has a HiFi Filter cross-reference of SA17281.
Basic Specifications
| Item | Specification |
|---|---|
| Part Number | 54672530 |
| Brand | Ingersoll Rand |
| Part Name | Air Filter Element |
| Compatible Models | N55, N75 screw compressors |
| Cross-Reference | HiFi SA 17281 |
| Unit of Measure | EA (each) |
| Supply Status | Normally stocked |
Technical Specifications
1. Filtration Performance
| Parameter | Value |
|---|---|
| Filtration Rating | 5–10 μm |
| Filtration Efficiency | Approx. 99% @ 10 μm |
| Filter Class | F7–F8 (per EN 779 / ISO 16890) |
| Dust Holding Capacity | Approx. 1.0–1.5 kg |
| Beta Ratio | β₁₀ ≥ 1000 |
2. Flow and Pressure Drop
| Parameter | Value |
|---|---|
| Rated Air Flow | Approx. 10–13 Nm³/min (for 55–75 kW models) |
| Initial Pressure Drop | Approx. 250–350 Pa (clean, at rated flow) |
| Operating Pressure Differential | 350–600 Pa |
| Alarm / Final Resistance | Alarm: 700 Pa; Final: 900 Pa (must replace) |
| Pressure Drop vs. Energy | Every 100 Pa increase in inlet pressure loss raises specific power by approx. 0.3% |
3. Dimensions and Installation
| Parameter | Value |
|---|---|
| Outer Diameter | 247 mm |
| Inner Diameter | 150 mm |
| Overall Height | 365 mm |
| Weight | Approx. 5 kg |
| Effective Filter Area | Approx. 3.0–4.0 m² (pleated media) |
| Mounting Interface | Center through-hole, end-cap seal |
| Seal Type | Red polyurethane (PU) end-cap seal, double-sided |
4. Construction Materials
| Parameter | Value |
|---|---|
| Media | Synthetic/glass fiber, yellow filter paper |
| Media Weight | Approx. 120–150 g/m² |
| Inner/Outer Support | Galvanized expanded metal mesh (both sides) |
| End Caps | Red polyurethane (PU) |
| Seals | Red nitrile rubber (NBR), top and bottom |
| Adhesive | Polyurethane adhesive bonding end caps to media |
5. Operating Conditions
| Parameter | Value |
|---|---|
| Operating Temperature | Continuous: -20°C to 80°C; short-term max 100°C |
| Relative Humidity | ≤95% RH, no condensation |
| Collapse Pressure | ≥ 4.0 kPa overall |
| Features | Low resistance, high dust holding capacity, suitable for continuous industrial operation |
6. Service Life and Maintenance
| Parameter | Value |
|---|---|
| Service Life | Approx. 4,000 hours (8–12 months) under standard conditions; 2,000–3,000 hours in high-dust environments |
| Shelf Life | 36 months in original sealed packaging, dry, ambient temperature |
7. Standards
- ISO 5011: Inlet air cleaning equipment for internal combustion engines and compressors — performance testing
- ISO 16890 / EN 779: General ventilation air filters — classification
- GB/T 14295: Air filters
- GB/T 6165: Test methods for air filter performance
Maintenance and Installation
Replacement Interval
- Standard conditions: every 4,000 hours or 8–12 months, whichever comes first
- High-dust conditions: every 2,000–3,000 hours
- Replace immediately if visual inspection shows blackened media, heavy dust buildup, or pressure differential reaches 900 Pa
Installation Steps
- Shut down and lock out: Turn off main power to the compressor, apply lockout/tagout (LOTO), and confirm the unit has fully stopped.
- Open the air filter housing: Loosen the retaining bolts or clamps and remove the cover.
- Remove the old element: Pull out the old 54672530 element and check whether the seal remains in the housing groove.
- Clean the housing: Wipe the inner walls and sealing surface with a clean cloth to remove dust and debris.
- Inspect the new element: Verify part number 54672530, check media for damage, end caps for cracks, and red seals for aging.
- Install the new element: Place it vertically into the center of the housing, ensuring both seals seat correctly without tilting.
- Reinstall the cover: Refit the cover and tighten bolts or clamps evenly.
- Start-up check: Start the compressor and check for air leaks at the filter housing.
Frequently Asked Questions
Q1: Is the 54672530 a genuine Ingersoll Rand part?
A: Yes, the 54672530 is a genuine Ingersoll Rand part featuring yellow high-efficiency media and a red polyurethane end-cap seal, designed for Ingersoll Rand N55/N75 screw compressors.
Q2: Which models does the 54672530 fit?
A: It fits Ingersoll Rand N55 and N75 series screw compressors. If you are unsure about your model, provide the serial number for verification.
Q3: What is the cross-reference for the 54672530?
A: The HiFi Filter cross-reference is SA 17281. It is also compatible with the following Atlas Copco part numbers: 1613950100, 1613951000, 1631043700, 2255300129.
Q4: What are the dimensions of the 54672530?
A: Outer diameter approx. 247 mm, inner diameter approx. 150 mm, overall height approx. 365 mm, weight approx. 5 kg.
Q5: How do I know when to replace the air filter element?
A: Replace when: (1) visual inspection shows blackened media or heavy dust; (2) operating pressure differential reaches the alarm value of 700 Pa; or (3) the 4,000-hour or 8–12 month interval is reached.
Compatible Models
| Series | Models |
|---|---|
| N Series | N55 |
| N Series | N75 |
To confirm compatibility, please provide the compressor serial number for precise verification.
Related Parts
| Part Number | Name | Notes |
|---|---|---|
| SA 17281 | HiFi Air Filter Element | 54672530 cross-reference |
| 1613950100 | Atlas Copco Air Filter Element | Compatible cross-reference |
| 1613951000 | Atlas Copco Air Filter Element | Compatible cross-reference |
| 1631043700 | Atlas Copco Air Filter Element | Compatible cross-reference |
| 2255300129 | Atlas Copco Air Filter Element | Compatible cross-reference |
| 88111901 | Air Filter Element SSR M37 | For SSR M37/M45 models |
| 54672530 | Air Filter Element | This page product |
Note: For 100% accurate matching, please provide the complete compressor serial number. We will check the original parts diagram and confirm current availability. Request a quotation or datasheet for export orders.